Profil
Jovana Ružić
Zvanje:
Viši naučni saradnik
Direktni telefoni:
Lokal:
Naučna oblast:
2
Veće oblasti:
Materijali,
Orcid broj:
Organizaciona jedinica:
170
DIPLOME
-
Sinteza i karakterizacija kompozita sa osnovom bakra ojačanog nano- i mikro česticama ZrB2
metalurško inženjerstvo
ZVANJA
M faktor
Kategorija | Broj | Koeficijent | Ukupno |
---|---|---|---|
M11 | 0 | 14 | 0 |
M12 | 0 | 10 | 0 |
M13 | 0 | 7 | 0 |
M14 | 0 | 4 | 0 |
M15 | 0 | 3 | 0 |
M16 | 0 | 2 | 0 |
M17 | 0 | 3 | 0 |
M18 | 0 | 2 | 0 |
M21a | 8 | 10 | 80 |
M21 | 10 | 8 | 80 |
M22 | 7 | 5 | 35 |
M23 | 2 | 3 | 6 |
M24 | 3 | 3 | 9 |
M25 | 0 | 1.5 | 0 |
M26 | 0 | 1 | 0 |
M27 | 0 | 0.5 | 0 |
M28a | 0 | 3.5 | 0 |
M28b | 1 | 2.5 | 2.5 |
M29a | 0 | 1.5 | 0 |
M29b | 0 | 1.5 | 0 |
M29v | 1 | 1 | 1 |
M31 | 0 | 3.5 | 0 |
M32 | 0 | 1.5 | 0 |
M33 | 8 | 1 | 8 |
M34 | 17 | 0.5 | 8.5 |
M35 | 0 | 0.3 | 0 |
M36 | 0 | 1.5 | 0 |
M41 | 0 | 7 | 0 |
M42 | 0 | 5 | 0 |
M43 | 0 | 3 | 0 |
M44 | 0 | 2 | 0 |
M45 | 0 | 1.5 | 0 |
M46 | 0 | 1 | 0 |
M47 | 0 | 0.5 | 0 |
M48 | 0 | 2 | 0 |
M49 | 0 | 1 | 0 |
M51 | 2 | 2 | 4 |
M52 | 1 | 1.5 | 1.5 |
M53 | 0 | 1 | 0 |
M54 | 1 | 0.2 | 0.2 |
M55 | 0 | 1 | 0 |
M56 | 0 | 0.3 | 0 |
M57 | 0 | 0.2 | 0 |
M61 | 0 | 1.5 | 0 |
M62 | 0 | 1 | 0 |
M63 | 0 | 0.5 | 0 |
M64 | 0 | 0.2 | 0 |
M65 | 0 | 0 | 0 |
M66 | 0 | 1 | 0 |
M67 | 0 | 0 | 0 |
M68 | 0 | 0 | 0 |
M69 | 0 | 0 | 0 |
M71 | 0 | 6 | 0 |
M72 | 0 | 3 | 0 |
M81 | 0 | 8 | 0 |
M82 | 1 | 6 | 6 |
M83 | 0 | 4 | 0 |
M84 | 0 | 3 | 0 |
M85 | 0 | 2 | 0 |
M86 | 0 | 1 | 0 |
M87 | 0 | 0.5 | 0 |
M91 | 0 | 16 | 0 |
M92 | 0 | 12 | 0 |
M93 | 0 | 9 | 0 |
M94 | 0 | 7 | 0 |
M95 | 0 | 12 | 0 |
M96 | 0 | 8 | 0 |
M97 | 0 | 5 | 0 |
M98 | 0 | 3 | 0 |
M99 | 0 | 2 | 0 |
M101 | 0 | 8 | 0 |
M102 | 0 | 5 | 0 |
M103 | 0 | 3 | 0 |
M104 | 0 | 2 | 0 |
M105 | 0 | 1 | 0 |
M106 | 0 | 0.5 | 0 |
M107 | 0 | 0.5 | 0 |
M108 | 0 | 4 | 0 |
M109 | 0 | 2.5 | 0 |
M110 | 0 | 1.5 | 0 |
M111 | 0 | 1 | 0 |
M112 | 0 | 0.5 | 0 |
M121 | 0 | 3 | 0 |
M122 | 0 | 2 | 0 |
M123 | 0 | 1 | 0 |
M124 | 0 | 1 | 0 |
Ukupno M faktor:
241.7
NI radovi
# | Naziv, Datum, Grupa, Vrsta | Godina | Autori | Status | Akcija |
---|---|---|---|---|---|
1 |
Effect of synthesis parameters on structural and mechanical properties of Ti3Al–Nb–Mo intermetallic compound obtained by powder metallurgy techniques
Transactions of nonferrous metals society of China , , 2017 M20 | M21 |
2017 | B. Dimčić, J. Stašić, J. Ružić, D. Božić |
Odobren
|
|
2 |
Laser sintering of Cu–Zr–ZrB2 composite
Applied Surface Science , , 2014 M20 | M21 |
2014 | J. Stašić, M. Trtica, V. Rajković, J. Ružić, D. Božić |
Odobren
|
|
3 |
Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition
Materials & Design , / , 2014 M20 | M21 |
2014 | Aleksandar Vencl, Ilija Bobić, Filip Vučetić, Biljana Bobić, Jovana Ružić |
Odobren
|
|
4 |
Synthesis and properties of a Cu-Ti-TiB(2) composite hardened by multiple mechanisms
Materials Science and Engineering A , , 2011 M20 | M21 |
2011 | D. Božić, J. Stašić, J. Ružić, M. Vilotijević, V. Rajković |
Odobren
|
|
5 |
Synthesis, microstructure and mechanical properties of ZrB2 nano and microparticle reinforced copper matrix composite by in situ processings
Materials and Design , , 2014 M20 | M21 |
2014 | J. Ružić, J. Stašić, V. Rajković, D. Božić |
Odobren
|
|
6 |
Edible blend films of pectin and poly (ethylene glycol): Preparation and physico-chemical evaluation
Food Hydrocolloids , , 2018 M20 | M21a |
2018 | S. Šešlija, A. Nešić, J. Ružić, M. Kalagasidis Krušić, S. Veličković, R. Avolio, G. Santagata, M. Malinconico |
Odobren
|
|
7 |
Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macroparticles
Materials Science and Engineering A , / , 2014 M20 | M21a |
2014 | Илија Бобић, Јована Ружић, Биљана Бобић, Мирослав Бабић, Александар Венцл, Слободан Митровић |
Odobren
|
|
8 |
Mo segregation and distribution in Ti–Mo alloy investigated using nanoindentation
Materials Science and Engineering A , , 2018 M20 | M21a |
2018 | J. Ruzic, S. Emura, X. Ji, I. Watanabe |
Odobren
|
|
9 |
Pectinpolyvinylpyrrolidone films: A sustainable approach to the development of biobased packaging materials
Composites Part B: Engineering , , 2017 M20 | M21a |
2017 | A. Nešić, J. Ružić, M. Gordić, S. Ostojić, D. Micić, A. Onjia |
Odobren
|
|
10 |
Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys
Materials Science and Engineering: A , , 2021 M20 | M21a |
2021 | Jovana Ruzic, Kenta Goto, Ikumu Watanabe, Toshio Osada, Liberty Wu, Takahito 2021Ohmura |
Odobren
|
|
11 |
Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting
Journal of Composite Materials , , 2018 M20 | M22 |
2018 | B. Bobić, A. Vencl, J. Ružić, I. Bobić, Z. Damnjanović |
Odobren
|
|
12 |
Synthesis and characteristics of precipitation hardened Cu-Cr alloy and multiply hardened Cu-Cr-Al2O3 nanocomposite obtained using powder metallurgy techniques
International Journal of Materials Research , , 2014 M20 | M22 |
2014 | D. Bozic, J. Ruzic, J. Stasic, V. Rajkovic |
Odobren
|
|
13 |
Synthesis and Characterization of CuZrB2 Alloy Produced by PM Techniques
Science of Sintering , , 2014 M20 | M22 |
2014 | J. Ružić, J. Stašić, S. Marković, K. Raić, D. Božić |
Odobren
|
|
14 |
Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by metallurgy processing techniques
Science and Engineering of Composite Materials , , 2015 M20 | M23 |
2015 | J. Ružić, J. Stašić, V. Rajković, K. Raić, D. Božić |
Odobren
|
|
15 |
Nano-Indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere
Materials Transactions , , 2019 M20 | M23 |
2019 | J. Ruzic, I. Watanabe, K. Goto, T. Ohmura |
Odobren
|
|
16 |
Data analytics approach to predict the hardness of copper matrix composites
Metallurgical and Materials Engineering Journal , , 2020 M20 | M24 |
2020 | Somesh Kr. Bhattacharya, Ryoji Sahara, Dušan Božić, Jovana Ružić |
Odobren
|
|
17 |
Effect of process parameters on the phase transformation kinetics in copper-based alloys and composites
Metallurgical and Materials Engineering Journal , , 2020 M20 | M24 |
2020 | Marko Simić, Nenad Radović, Milan Gordić, Jovana Ružić |
Odobren
|
|
18 |
Special Issue "Multiscale Modelling and Characterization of Mechanical Properties in Heat-Resistant Alloys"
Crystals , , 2021 M20 | M28b |
2021 | Ikumu Watanabe, Nobufumi Ueshima, Jovana Ruzic, Hongzhi Cui |
Odobren
|
|
19 |
Composite materials - novelties in manufacturing and application
Metallurgical and Materials Engineering Journal , , 2021 M20 | M29v |
2021 | Jovana Ružić |
Odobren
|
|
20 |
Analysis of the particle motion during mechanical alloying using EDEM software
19th IFAC Conference on Technology, Culture and International Stability (TECIS-2019) , , 2019 M30 | M33 |
2019 | N. Stoimenov, J. Ruzic |
Odobren
|
|
21 |
Influence of mechanical alloying time on particle size of copper matrix composite
22nd International Scientific Conference on Achievements in Mechanical and Materials Engineering , , 2015 M30 | M33 |
2015 | Јована Ружић, K. Jakimovska, N. Stoimenov, S. Gyoshev, D. Karastoyanov |
Odobren
|
|
22 |
Investigation of Milling Processes in High Energy Mill (ATTRITOR)
XXV International Scientific and Technical Conference (ADP-2016) , Sozopol, Bugarska , 2016 M30 | M33 |
2016 | N. Stoimenov, J. Ruzic |
Odobren
|
|
23 |
Nano-indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere
International Conference on Advanced Technology of Experimental Mechanics (ATEM'19) , , 2019 M30 | M33 |
2019 | Ikumu Watanabe, Jovana Ruzic, Kenta Goto, Takahito Ohmura |
Odobren
|
|
24 |
Static and kinetic friction of electroless Ni composite coatings
22nd International Scientific Conference on Achievements in Mechanical and Materials Engineering , , 2015 M30 | M33 |
2015 | Александар Венцл, Јакимовска К., Иванова Б., Ружић Ј., Симеонов С., Кандева М. |
Odobren
|
|
25 |
Analysis of Relationship between Properties of Mechanically Alloyed Powders and Corresponding Process Parameters
148th Annual Meeting & Exhibition (TMS 2019), 10-14/03/2019 , San Antonio, Texas, USA , 2019 M30 | M34 |
2019 | Jovana Ružić, Nikolay Stoimenov, Stanislav Gyoshev, Dimitar Karastoyanov |
Odobren
|
|
26 |
ANALYSIS OF THE INFLUENCE OF VGS STRUCTURE ON MECHANICAL PROPERTIES OF Ti-12Mo ALLOY
3rd Metallurgical & Materials Engineering Congress of South-East Europe , , 2017 M30 | M34 |
2017 | Jovana Ruzic, Satoshi Emura, Ikumu Watanabe, Takahito Ohmura |
Odobren
|
|
27 |
Investigation of metal powders using x-ray computed tomography
4rd Metallurgical & Materials Engineering Congress of South-East Europe, the Book of abstracts, 05-07/06/2019 , Beograd, Srbija , 2019 M30 | M34 |
2019 | Jovana Ružić, Stanisla Gyoshev, Nikolay Stoimenov, Dimitar Karastoyanov |
Odobren
|
|
28 |
INVESTIGATION OF THE Mo DISTRIBUTION THROUGH THE LARGE Β-PHASE GRAINS AND ITS INFLUENCE ON ELASTIC MODULUS OF Ti-12Mo ALLOY BY NANOINDENTATION TEST
4th Conference of The Serbian Society for Ceramic Materials , , 2017 M30 | M34 |
2017 | Jovana Ruzic, Satoshi Emura, Ikumu Watanabe, Takahito Ohmura |
Odobren
|
|
29 |
Mechanical properties of porous ceramic monoliths based on diatomite
3rd Conference of the Serbian Society for Ceramic Materials , , 2015 M30 | M34 |
2015 | М. Кокунешоски, Ј. Мајсторовић, Ј. Ружић, Б. Матовић, С. Илић, А. Егеља, А. Шапоњић |
Odobren
|
|
30 |
Polymer and mechanical characteristics of bulk-fill, low-shrinkage and hybrid composites
CED-IADR/NOF Oral Health Research Congress , / , 2017 M30 | M34 |
2017 | В. Милетић, Д. Перић, J. Stašić, С. Левић, Ј. Ружић |
Odobren
|
|
31 |
Influence of the fabrication process of copper matrix composites on cavitation erosion resistance
Metallurgical and Materials Engineering , , 2017 M50 | M51 |
2017 | J. Ružić, J. Stašić, D. Božić, M. Dojčinović, T. Volkov-Husović |
Odobren
|
|
32 |
Prediction of hardness and electrical properties in ZrB2 particle reinforced metal matrix composites using artificial neural network
Metallurgical and Materials Engineering , , 2014 M50 | M51 |
2014 | J. Ružić, D. Antanasijević, D. Božić, K. Raić |
Odobren
|
|
33 |
Understanding plasma spraying process and characteristics of DC-arc plasma gun (PJ-100)
Metallurgical and Materials Engineering , , 2012 M50 | M52 |
2012 | J. Ružić, M. Vilotijević, D. Božić, K. Raić |
Odobren
|
|
34 |
Dobijanje nanokompozita sa osnovom od legure cinka ZA-27 uz dodatak nanočestica SiC ili Al2O3 kombinacijom mehaničkog legiranja i kompokasting postupka
Dobijanje nanokompozita sa osnovom od legure cinka ZA-27 uz dodatak nanočestica SiC ili Al2O3 kombinacijom mehaničkog legiranja i kompokasting postupka , / , 2016 M80 | M82 |
2016 | Биљана Бобић, Александар Венцл, Мирослав Бабић, Ј. Ружић, Б. Јегдић, Илија Бобић |
Odobren
|
|
35 |
Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning
Materials , , 2023 M20 | M21 |
2023 | Gordana Marković, Vaso Manojlović, Jovana Ružić, Miroslav Sokić |
Odobren
|
|
36 |
STUDY OF THE CHANGES IN MECHANICAL PROPERTIES OF THE COPPER-ZIRCONIUM ALLOYS INFLUENCED BY MINOR BORON ADDITION
5th Metallurgical & Materials Engineering Congress of South-East Europe 2023 – Trebinje, BIH , Trebinje , 2023 M30 | M33 |
2023 | Jovana Ružić, Marko Simić, Dušan Božić, Nikolay Stoimenov, Stanislav Goshev, Jelena Stašić |
Odobren
|