Profil

Avatar

Jelena Stašić

Zvanje:
Naučni savetnik
Direktni telefoni:
3408685
Lokal:
1685
Naučna oblast:
1
Veće oblasti:
Materijali,
Orcid broj:
Organizaciona jedinica:
170

M faktor

Kategorija Broj Koeficijent Ukupno
M11 0 14 0
M12 0 10 0
M13 0 7 0
M14 0 4 0
M15 0 3 0
M16 0 2 0
M17 0 3 0
M18 0 2 0
M21a 6 10 60
M21 26 8 208
M22 18 5 90
M23 7 3 21
M24 3 2 6
M25 0 1.5 0
M26 0 1 0
M27 0 0.5 0
M28a 0 3.5 0
M28b 0 2.5 0
M29a 0 1.5 0
M29b 0 1.5 0
M29v 0 1 0
M31 0 3.5 0
M32 2 1.5 3
M33 5 1 5
M34 21 0.5 10.5
M35 0 0.3 0
M36 0 1.5 0
M41 1 7 7
M42 0 5 0
M43 0 3 0
M44 0 2 0
M45 0 1.5 0
M46 0 1 0
M47 0 0.5 0
M48 0 2 0
M49 0 1 0
M51 0 2 0
M52 0 1.5 0
M53 0 1 0
M54 2 0.2 0.4
M55 0 1 0
M56 0 0.3 0
M57 0 0.2 0
M61 0 1.5 0
M62 0 1 0
M63 0 1 0
M64 0 0.2 0
M65 0 0 0
M66 0 1 0
M67 0 0 0
M68 0 0 0
M69 0 0 0
M71 0 6 0
M72 0 3 0
M81 0 0 0
M82 0 0 0
M83 0 0 0
M84 0 0 0
M85 0 0 0
M86 0 0 0
M87 0 0 0
M91 0 0 0
M92 0 0 0
M93 0 0 0
M94 0 0 0
M95 0 0 0
M96 0 0 0
M97 0 0 0
M98 0 0 0
M99 0 0 0
M101 0 0 0
M102 0 0 0
M103 0 0 0
M104 0 0 0
M105 0 0 0
M106 0 0 0
M107 0 0 0
M108 0 0 0
M109 0 0 0
M110 0 0 0
M111 0 0 0
M112 0 0 0
M121 0 3 0
M122 0 2 0
M123 0 1 0
M124 0 1 0

Ukupno M faktor:

410.9
--> -->--> -->--> --> --> -->--> -->--> --> -->-->

NI radovi

# Naziv, Datum, Grupa, Vrsta Godina Autori Status Akcija
1 A comparative study of microstructure, compressive, and fracture properties of Ti3Al-based intermetallics produced via powder metallurgy, and melting and casting processes
International Journal of Materials Research , , 2012
M20 | M21 		2012 Б. Димчић, Ј. Сташић, О. Радић, Д. Божић
Odobren
2 A study of Roman glass from Mala Barutana/Belgrade Fortress irradiated with pulsed CO2, Nd:YAG and ruby laser - Comparison
Journal of Non-crystalline Solids , , 2012
M20 | M21 		2012 S. Polić-Radovanović, S. Ristić, J. Stašić, M. Trtica
Odobren
3 An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering
The International Journal of Advanced Manufacturing Technology , / , 2015
M20 | M21 		2015 Јелена Сташић, В. Рајковић, Јована Ружић, Душан Божић
Odobren
4 Analysis of copper surface features obtained using TEA CO2 laser at reduced air pressure
APPLIED SURFACE SCIENCE , , 2013
M20 | M21 		2013 Милош Момчиловић, Милан Тртица, Јован Цигановић, Јелена Савовић, Јелена Сташић, Мирослав Кузмановић
Odobren
5 Densification behavior of 316L-NiB stainless steel powder and surface morphology during selective laser melting process using pulsed Nd:YAG laser
RAPID PROTOTYPING JOURNAL , , 2019
M20 | M21 		2019 Stasic Jelena, Bozic Dusan
Odobren
6 Effect of synthesis parameters on structural and mechanical properties of Ti3Al−Nb−Mo intermetallic compound obtained by powder metallurgy techniques
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , , 2017
M20 | M21 		2017 Biljana Dimčić, Jelena Stašić, Jovana Ružić, Dušan Božić
Odobren
7 Focusing geometry induced size tailoring of the silver nanoparticles obtained by laser ablation in water
LASER PHYSICS , , 2014
M20 | M21 		2014 Јелена Сташић, G. Joksic, Lj. Zivkovic, I.N. Mihailescu, Corneliu Ghica, Andrei Kuncser, Милан Тртица
Odobren
8 Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266 nm; comparison with 532 and 1064 nm pulses
Applied Surface Science , , 2009
M20 | M21 		2009 J. Stasic, M. Trtica, B. Gakovic, D. Batani, T. Desai, G. Brankovic
Odobren
9 Optimization of silver nanoparticles production by laser ablation in water using a 150-ps laser
JOURNAL OF NANOPARTICLE RESEARCH , , 2016
M20 | M21 		2016 J. Stasic, Lj. Zivkovic, М. Trtica
Odobren
10 Processing, characterization and properties of copper-based composites strengthened by low amount of alumina particles
Powder Technology , / , 2014
M20 | M21 		2014 В. Рајковић, Душан Божић, Јелена Сташић, Huaiwen Wang, Милан Јовановић
Odobren
11 Size of silver nanoparticles determines proliferation ability of human circulating lymphocytes in vitro
Toxicology Letters , / , 2016
M20 | M21 		2016 Гордана Јоксић, Јелена Сташић, Јелена Филиповић, Ана Валента Шобот, Милан Тртица
Odobren
12 Strengthening effects in precipitation and dispersion hardened powder metallurgy copper alloys
MATERIALS & DESIGN , , 2013
M20 | M21 		2013 Јована Ружић, Јелена Сташић, В. Рајковић, Душан Божић
Odobren
13 Studies of the Iranian medieval ceramics surface modified by pulsed TEA CO2 and Nd:YAG lasers
CERAMICS INTERNATIONAL , , 2015
M20 | M21 		2015 Сузана Полић, Славица Ристић, Сташић Јелена, Тртица Милан, Бојана Радојковић
Odobren
14 Superficial changes on the Inconel 600 superalloy by picosecond Nd:YAG laser operating at 1064, 532, and 266 nm: Comparative study
Laser and Particle Beams , , 2012
M20 | M21 		2012 Ј. Сташић, Б. Гаковић, М. Тртица, T. Desai, L. Volpe
Odobren
15 Surface behavior of 16Cr3Al ODS steel-Effects of high laser intensity 10(14) W/cm(2) in ambiences of air, helium and vacuum
FUSION ENGINEERING AND DESIGN , , 2020
M20 | M21 		2020 Trtica M., Stasic J., Limpouch J., Gavrilov P., Chen X., Ciganovic J.
Odobren
16 Surface modifications of AISI 1045 steel created by high intensity 1064 and 532 nm picosecond Nd:YAG laser pulses
Applied Surface Science , , 2009
M20 | M21 		2009 J. Stasic, M. Trtica, B. Gakovic, S. Petrovic, D. Batani, T. Desai, P. Panjan
Odobren
17 Synthesis and properties of a Cu-Ti-TiB2 composite hardened by multiple mechanisms
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS: PROPERTIES, MICROSTRUCTURE AND PROCESSING , / , 2011
M20 | M21 		2011 Душан Божић, Јелена Сташић, Јована Ружић, Мирољуб Вилотијевић, В. Рајковић
Odobren
18 The effect of NiB additive on surface morphology and microstructure of 316L stainless steel single tracks and layers obtained by SLM
Surface and Coatings Technology , / , 2016
M20 | M21 		2016 Јелена Сташић, Душан Божић
Odobren
19 Titanium surface modification using femtosecond laser with 1013–1015 W/cm2 intensity in vacuum
LASER AND PARTICLE BEAMS , , 2013
M20 | M21 		2013 Милан Тртица, D. Batani, R. Redaelli, J. Limpouch, Kmetik, Јован Цигановић, J. Stasic, Биљана Гаковић, Милош Момчиловић
Odobren
20 Femtosecond laser-assisted surface modification of tungsten with 10(15) W/cm(2) intensity in air and vacuum ambience
APPLIED SURFACE SCIENCE , / , 2019
M20 | M21a 		2019 Trtica M., Limpouch J., Stasic J., Gavrilov P.
Odobren
21 Laser-assisted surface modification of Ti-implant in air and water environment
, / , 2018
M20 | M21a 		2018 М. Тртица, Ј. Сташић, D. BATANI, R. Benocci, V. Narayanan, Ј. Цигановић
Odobren
22 Microstructure and enhanced tensile properties of AlCoxCrFeNi high entropy alloys with high Co content fabricated by laser melting deposition
Journal of Alloys and Compounds , , 2022
M20 | M21a 		2022 Senlin Zhao, Dongqun Xin, Xizhang Chen, Jelena Stasic, Milan Trtica, Arshad Noor Siddiquee, Sanjay Mohan
Odobren
23 Nickel-based super-alloy Inconel 600 morphological modifications by high repetition rate femtosecond Ti:sapphire laser
Laser and Particle Beams , , 2009
M20 | M21a 		2009 J. Stasic, B. Gakovic, A. Krmpot, V. Pavlovic, M. Trtica, B. Jelenkovic
Odobren
24 Obtaining of reinforced Cu-Ti, Cu-Ti-TiB2 foils through green compact laser sintering
JOURNAL OF ALLOYS AND COMPOUNDS , , 2018
M20 | M21a 		2018 Stasic J., Bozic D.
Odobren
25 The influence of applying the additional continuous laser on the synthesis of silicon-based nanoparticles by picosecond laser ablation in liquid
Laser Physics Letters , , 2014
M20 | M21a 		2014 D.M. Popovic, J.S. Chai, A.A. Zekic, M. Trtica, J. Stasic, M.Z. Sarvan
Odobren
26 Continuous wave laser for tailoring the photoluminescence of silicon nanoparticles produced by laser ablation in liquid
Journal of Applied Physics , / , 2017
M20 | M22 		2017 Д. Поповић, A. Kushima, M.I. Bogdanovic, J. Chai, Б. Касалица, М. Тртица, Ј. Сташић, А. Жекић
Odobren
27 In-situ processing of TiB2 nanoparticle-reinforced copper matrix composites
Science of sintering , , 2009
M20 | M22 		2009 D. Bozic, I. Cvijovic-Alagic, B. Dimcic, J. Stasic, V. Rajkovic
Odobren
28 Influence of SiC particles distribution on mechanical properties and fracture of DRA alloys
Materials & Design , , 2010
M20 | M22 		2010 Д. Божић, Б. Димчић, О. Димчић, Ј. Сташић, В. Рајковић
Odobren
29 Mechanical properties of biomorphic silicon carbide ceramics
Science of Sintering , , 2011
M20 | M22 		2011 М. Гордић, Б. Бабић, Ј. Сташић, М. Тртица, Т. Волков-Хусовић, М. Пошарац, Б. Матовић
Odobren
30 Microstructure and properties of gravity sintered 316L stainless steel powder with nickel boride addition
Science of Sintering , / , 2016
M20 | M22 		2016 Душан Божић, Мирољуб Вилотијевић, Јована Ружић, Урош Јовановић, Јелена Сташић
Odobren
31 Microstructures and mechanical properties of ZA27-Al2O3 composites obtained by powder metallurgy process
Science of Sintering , , 2011
M20 | M22 		2011 Д. Божић, Ј. Сташић, В. Рајковић
Odobren
32 Moisture and gamma-ray irradiation effects on the mechanical properties of carbon fibre-reinforced plastics
Journal of Microscopy-Oxford , , 2008
M20 | M22 		2008 D. Sekulic, D. Bozic, B. Babic, J. Stasic, M. Stevanovic
Odobren
33 Multiple strengthening mechanisms in nanoparticle-reinforced copper matrix composites
BULLETIN OF MATERIALS SCIENCE , / , 2011
M20 | M22 		2011 Душан Божић, Јелена Сташић, , Мирољуб Вилотијевић, Вишеслава Рајковић
Odobren
34 Surface modification of a-CN/TiAlN double layer coating on ASP30 steel induced by femtosecond laser with 1013 – 1014 W/cm2 intensity in vacuum
LASER AND PARTICLE BEAMS , , 2015
M20 | M22 		2015 Милан Тртица, J. Limpouch, P. Gavrilov, L. Gemini, P. Panjan, Јелена Сташић, Дубравка Миловановић, G. Brankovic
Odobren
35 Surface modification of ASP 30 steel induced by femtosecond laser with 1014 and 1013 W/cm2 intensity in vacuum
Laser and Particle Beams , / , 2017
M20 | M22 		2017 М. Тртица, J. Limpouch, P. Gavrilov, P. Hribek, Ј. Сташић, Г. Бранковић, X. Chen
Odobren
36 Synthesis and characteristics of precipitation hardenedCu-Cr alloy and multiply hardened Cu-Cr-Al2O3 nanocomposite obtained using powder metallurgy techniques
International Journal of Materials Research , , 2014
M20 | M22 		2014 Душан Божић, Јована Ружић, Јелена Сташић, В. Рајковић
Odobren
37 Synthesis and characterization of Cu-ZrB2 alloy produced by PM techniques
Science of Sintering , / , 2014
M20 | M22 		2014 Јована Ружић, Јелена Сташић, С. Марковић, Карло Раић, Душан Божић
Odobren
38 The effect of synthesis of the starting powders on the properties of Cu-Ti-TiB2 alloy obtained by laser melting
Science of Sintering , , 2020
M20 | M22 		2020 J. Stašić, D. Božić
Odobren
39 The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy
International Journal of Materials Research , , 2008
M20 | M22 		2008 D. Bozic, D. Sekulic, J. Stasic, V. Rajkovic, M. Jovanovic
Odobren
40 Micro- and nanosecond laser TiN coating/steel modification: Morphology studies
Russian Journal of Physical Chemistry A , , 2009
M20 | M23 		2009 M. Trtica, V.F. Tarasenko, B. Gakovic, A.N. Panchenko, B. Radak, J. Stasic
Odobren
41 Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by powder metallurgy techniques
Science and Engineering of Composite Materials , / , 2015
M20 | M23 		2015 Јована Ружић, Јелена Сташић, В. Рајковић, Карло Раић, Душан Божић
Odobren
42 Properties of copper-based composite reinforced with Al2O3 particles of different size
Advanced Materials Research , , 2014
M20 | M23 		2014 В. Рајковић, Д. Божић, Ј. Сташић, М. Јовановић, H. Wang
Odobren
43 Pulsed TEA CO2 laser irradiation of titanium in nitrogen and carbon dioxide gas
Russian Journal of Physical Chemistry A , / , 2017
M20 | M23 		2017 Ј. Цигановић, П. Матавуљ, М. Тртица, Ј. Сташић, Ј. Савовић, С. Живковић, М. Момчиловић
Odobren
44 Surface modification of metallic targets with ultrashort laser pulses
Acta Physica Polonica A , , 2009
M20 | M23 		2009 B. Gakovic, J. Stasic, S. Petrovic, B. Radak, A. Krmpot, B. Jelenkovic, M. Trtica
Odobren
45 The effect of gamma radiation on the properties of activated carbon cloth
Journal of the Serbian Chemical Society , , 2009
M20 | M23 		2009 D. Sekulic, B. Babic, Lj. Kljajevic, J. Stasic, B. Kaludjerovic
Odobren
46 The effect of in-situ formed TiB2 particles on microstructural and mechanical properties of laser melted copper alloy, International Journal of Materials Research
International Journal of Materials Research , , 2020
M20 | M23 		2020 Jelena Stašić, Dušan Božić
Odobren
47 Innovative processing routes in manufacturing of metal matrix composite materials
Metallurgical and Materials Engineering , , 2021
M20 | M24 		2021 J. Ružić, M. Simić, N. Stoimenov, D. Božić, J. Stašić
Odobren
48 Influence of the fabrication process of copper matrix composites on cavitation erosion resistance
METALLURGICAL & MATERIALS ENGINEERING , , 2017
M20 | M24 		2017 Ј. Ружић, Ј. Сташић, Д. Божић, М. Дојчиновић, Т. Волков-Хусовић
Odobren
49 Material surface modification by ns, ps and fs laser pulses
Optics and Precision Engineering , , 2011
M20 | M24 		2011 M. Trtica, B. Gakovic, B. Radak, D. Batani, V. Tarasenko, S. Petrovic, J. Stasic, D. Milovanovic, A. Krmpot, B. Jelenkovic
Odobren
50 Material surface modifications by short (ns) and ultra-short (ps, fs) lasers –New Trends at VINCA Institute
XI Belarusian-Serbian symposium "Physics and diagnostics of laboratory and astrophysical plasmas" PDP-11 , , 2016
M30 | M32 		2016 М. Тртица, Ј. Цигановић, Ј. Сташић, Ј. Савовић
Za izmenu
51 Texturing of the bulk AISI 1045 carbon steel by pulsed femtosecond laser
X International Conference Atomic and Molecular Pulsed Lasers - AMPL , / , 2011
M30 | M32 		2011 Ј. Сташић, Б. Гаковић, М. Тртица
Odobren
52 Ultrashort Laser – Fusion Material Interaction
XV International Conference on Pulsed Lasers and Laser Applications AMPL-2021 , Tomsk, Rusija , 2021
M30 | M32 		2021 M. Trtica, J. Stašić, J. Limpouch, P. Gavrilov
Odobren
53 The Influence of Synthesis Parameters on Structural and Mechanical Properties of Cu-ZrB2 Alloy
1st Metallurgical & Materials Engineering Congress of South – East Europe (MME SEE 2013), Србија, 23. - 25. Maj, 2013 , , 2013
M30 | M33 		2013 Јована Ружић, Душан Божић, Јелена Сташић, В. Рајковић, Карло Раић
Odobren
54 Characterization of carbon fibrous materials modified by ruby laser radiation
The Ninth Yugoslav materials research society conference YUCOMAT 2007 , , 2007
M30 | M34 		2007 J. Stašić, M. Srećković, B. Kaluđerović, S. Ristić
Odobren
55 Effect of mechanical alloying time on cavitation erosion behavior of copper matrix composites hardened with various percentages of ZrB2 particles
3rd Metallurgical & Materials Engineering Congress of South-East Europe, Београд, Србија, 1. - 3. Jun, 2017 , , 2017
M30 | M34 		2017 Ј. Ружић, М. Дојчиновић, Д. Божић, Ј. Сташић, Т. Волков-Хусовић
Odobren
56 Investigation of mechanical and electrical properties of Cu-based composites reinforced with micro and nano ZrB2 particles
The Second regional round table: Refractory, Process industry and Nanotechnology, ROSOV PIN 2014, Fruška Gora, Srbija, 23. - 24. Okt, 2014 , , 2014
M30 | M34 		2014 Јована Ружић, Јелена Сташић, Давор Антанасијевић, Карло Раић, Душан Божић
Odobren
57 Mechanical properties and fracture mechanism of Ti3Al intermetallic produced by powder metallurgy and casting processes
2nd International Conference on Nanomaterials Science and Mechanical Engineering, Aveiro, Portugal, 9. - 12. jul, 2019 , , 2019
M30 | M34 		2019 D. Božić, B. Dimčić, J. Stašić
Odobren
58 Microstructure development of the Cu-Ti-TiB2 composite obtained by laser sintering
YUCOMAT 2018, Херцег Нови, Црна Гора, 3. - 7. Sep, 2018 , , 2018
M30 | M34 		2018 Јелена Сташић, Душан Божић
Odobren
59 Morphological study of silver in the conditions of ultrashort laser ablation in liquid
VIII International School and Conference on Photonics - PHOTONICA 2021 , Beograd, Srbija , 2021
M30 | M34 		2021 J. Stašić, M. Trtica, D. Batani, R. Benocci, V. Narayanan, A. Žekić
Odobren
60 Obtaining of reinforced Cu-Ti, Cu-Ti-TiB2 and Cu-TiB2 foils through green compact laser sintering
Particle-Based Materials Symposium, Saarbrucken, Nemačka, 9. - 10. Nov, 2017 , , 2017
M30 | M34 		2017 Ј. Сташић, Д. Божић
Odobren
61 Synthesis and characteristics of in situ hardened copper based alloys
Particle-Based Materials Symposium, Saarbrucken, Nemačka, 9. - 10. Nov, 2017 , , 2017
M30 | M34 		2017 Д. Божић, Ј. Сташић
Odobren
62 The effect of picosecond laser on silver target – surface modification and nanoparticles production
2nd International Conference on Nanomaterials Science and Mechanical Engineering, Aveiro, Portugal, 9. - 12. jul, 2019 , , 2019
M30 | M34 		2019 J. Stašić, M. Trtica
Odobren
63 The influence of boron on synthesis and characteristics of PM copper-zirconium alloys
YUCOMAT 2018, Херцег Нови, Црна Гора, 3. - 7. Sep, 2018 , , 2018
M30 | M34 		2018 Душан Божић, Јелена Сташић, Јована Ружић
Odobren
64 The role of target warming in the synthesis of silicon nanoparticles by picosecond laser ablation in liquid
Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 , / , 2013
M30 | M34 		2013 Д. Поповић, А. Жекић, М. Тртица, Ј. Сташић
Odobren
65 Titanium target irradiation by picosecond laser in air and water – surface morphology and synthesis of nanoparticles
PHOTONICA 2019, Beograd, Srbija, 26. - 30. avgust, 2019 , , 2019
M30 | M34 		2019 Trtica M., Stašić J., Batani D., Benocci R., Narayanan V, Ciganović J
Odobren
66 Tungsten and ods steel behavior at high intensity, 1015 W/cm2, laser irradiation in air and vacuum ambience: comparative study
SPIG 2020, 30th Summer School and International Symposium on the Physics of Ionized gases, Avgust 24-28, 2020, Šabac, Srbija , , 2020
M30 | M34 		2020 M. Trtica, J. Stasic, J. Limpouch, P. Gavrilov
Odobren
67 Tungsten modification induced by femtosecond laser with 1014 W/cm2 intensity in vacuum
VI International School and Conference on Photonics, Photonica 2017 , / , 2017
M30 | M34 		2017 М. Тртица, Ј. Сташић, J. Limpouch, P. Gavrilov
Odobren
68 Добијање металних материјала из праха техникама ласерског топљења и синтеровања
Институт "Винча", Универзитет у Београду , Београд , 2021
M40 | M41 		2021 Јелена Сташић, Душан Божић
Odobren
69 The influence of boron addition on properties of copper-zirconium alloys
Science of Sintering , , 2023
M20 | M22 		2023 M. Simić, J. Ružić, D. Božić, N. Stoymenov, S. Goshev, D. Karastoyanov, J. Stašić
Odobren
70 Hardness predicting of additively manufactured high-entropy alloys based on fabrication parameter-dependent machine learning
Advanced Engineering Materials , , 2022
M20 | M22 		2022 C. Zhou,Y. Zhang, J. Stasic, Y. Liang, X. Chen, M. Trtica
Odobren
71 ODS+Hf and AISI 316L steel surface variation at high laser Intensity, 10^13 W/cm^2, in air and vacuum: comparative study
Publications of the Astronomical Observatory of Belgrade (Contributed Papers, 31st Summer School and International Symposium on the Physics of Ionized Gases, September 5-9, 2022, Belgrade, Serbia) , , 2022
M30 | M33 		2022 M. Trtica, J. Stasic, X. Chen, J. Limpouch
Odobren
72 16Cr3Al-Hf ODS steel: Surface effects of high laser intensity of 1015 W/cm2 in ambiences of air, helium and vacuum
Fusion Engineering and Design , , 2023
M20 | M22 		2023 Milan Trtica, Jelena Stasic, Xizhang Chen, Jiri Limpouch, Petr Gavrilov, Andrijana Zekic
Odobren
73 Еffects of laser radiation at 10^13 W/cm2 intensity on ferritic ODS steel with and without Hf in helium and vacuum
Journal of Innovative Materials in Extreme Conditions , , 2023
M50 | M54 		2023 Milan Trtica, Jelena Stašić, Xizhang Chen, Jiri Limpouch, Andrijana Žekić
Odobren
74 Interaction of ns laser with 316L-NiB stainless steel obtained by powder metallurgy - morphological effects and LIBS analysis
IX International School and Conference on Photonics PHOTONICA 2023 , , 2023
M30 | M34 		2023 Jelena Stašić, Milan Trtica, Miroslav Kuzmanović, Jelena Savović, Jovana Ružić, Marko Simić, Xizhang Chen , Dušan Božić
Odobren
75 ns-laser – titanium interaction: hydrogen ambience
IX International School and Conference on Photonics PHOTONICA 2023 , , 2023
M30 | M34 		2023 Milan Trtica, Jelena Stašić
Odobren
76 Surface effects induced by short-pulsed lasers on PM-synthesized CuCrZr alloy
5th Metallurgical & Materials Engineering Congress of South-East Europe 2023 - MME SEE 2023 , , 2023
M30 | M34 		2023 Jelena Stašić, Milan Trtica, Jovana Ružić, Marko Simić, Andrijana Žekić, Dušan Božić
Odobren

Citati

Broj citata Referenca Status
460.0 Link | Dokument
Odobren